FreeAvailable now — free

Paint Calculator

Estimate paint quantities by area and number of coats.

Project & Input Data

Use the coverage rate from the manufacturer's product datasheet.

%

An editable user-defined allowance — not a universal engineering requirement.

Embedded standards & references

  • Declared area/volume and product dimensions; not structural conformity

Results are engineering aids and require verification by a qualified professional before use on a real project.

Engineering Assumptions

Direct calculation — Bounded geometric measurement and separate supply balance

  • Regular rectangular measurement only; openings cover all surfaces and cannot exceed gross area. Intermediate quantities are not rounded. RICS NRM2(2021) informs measurement boundaries, not a claim to implement every deduction rule.
  • https://www.rics.org/content/dam/ricsglobal/documents/standards/october_2021_nrm_2.pdf
  • Masonry/tiles: repeating module with joint, not a cutting layout; boundaries, bond and patterns need project take-off. No mortar, grout or strength calculation.
  • Paint uses practical product-datasheet coverage per whole coat. Plaster is wet volume only, not mix constituents. Stock matches product/unit and is allocated to this work.
  • Excavation is a vertical box only, without shoring/slope design. Swell and backfill ratio are project soil data, not code values. Backfill factor=loose/compacted volume; not an additional percentage counted twice.
  • Supply is separate from consumption; packs are whole. Excavation trips use loose volume and declared capacity; weight/road limits may increase trips. Results do not authorize construction.

Formula Summary

  • Net area = length × height × count − total openings
  • Repeating module = (unit length + joint) × (unit height + joint)
  • Paint = net area × whole coats / product coverage; plaster = net area × wet thickness
  • Earth: loose = in-situ × (1+swell); backfill loose = compacted × project ratio
  • Purchase packs = ceil(max(0, requirement − compatible stock) / pack size)

Built-in measurement definitions

QuantityIdentity
AreaL×H×N−openings
Box volumeL×W×D×N
Surplusmax(0,stock−required)+purchase−max(0,required−stock)

Declared geometric identities; no normative waste or soil factor

Results

Enter your data and press Calculate to see the results.

Engineering Insight

Coverage depends on the substrate, paint system, application method and surface preparation. Spray versus roller application can change consumption substantially, so rely on manufacturer data.

Recommended Action

Check the technical datasheet, use the practical rather than theoretical coverage rate, and order whole containers nearest to the calculated quantity.

Estimate paint litres for purchasing. Enter surface dimensions, openings, coats, your coverage rate and waste allowance. Free to use without signing in.

Method and assumptions

Bounded geometric measurement and separate supply balance

  • Net area = length × height × count − total openings
  • Repeating module = (unit length + joint) × (unit height + joint)
  • Paint = net area × whole coats / product coverage; plaster = net area × wet thickness
  • Earth: loose = in-situ × (1+swell); backfill loose = compacted × project ratio
  • Purchase packs = ceil(max(0, requirement − compatible stock) / pack size)
  • Regular rectangular measurement only; openings cover all surfaces and cannot exceed gross area. Intermediate quantities are not rounded. RICS NRM2(2021) informs measurement boundaries, not a claim to implement every deduction rule.
  • https://www.rics.org/content/dam/ricsglobal/documents/standards/october_2021_nrm_2.pdf
  • Masonry/tiles: repeating module with joint, not a cutting layout; boundaries, bond and patterns need project take-off. No mortar, grout or strength calculation.
  • Paint uses practical product-datasheet coverage per whole coat. Plaster is wet volume only, not mix constituents. Stock matches product/unit and is allocated to this work.
  • Excavation is a vertical box only, without shoring/slope design. Swell and backfill ratio are project soil data, not code values. Backfill factor=loose/compacted volume; not an additional percentage counted twice.
  • Supply is separate from consumption; packs are whole. Excavation trips use loose volume and declared capacity; weight/road limits may increase trips. Results do not authorize construction.

Next step and related links

Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.