ProfessionalAvailable now

Concrete Quantity Calculator

Estimate concrete quantities for defined structural elements.

This calculator is part of a paid level

Unlock this calculator with a single purchase; access stays on your account for life.

Use this calculator when you need the concrete volume for a footing, slab, column or beam and want a waste allowance applied consistently. You can either enter length × width × thickness × element count, or start from a volume already measured in your take-off.

Method and assumptions

Geometric element and pour quantity accounting

  • Dimensions mode: base volume = L × W × D × count
  • Direct mode: base volume = entered volume
  • Waste volume = base volume × waste%
  • Total concrete = base volume + waste volume
  • Schedule net=L×W×D×count−total deductions
  • Order=sum(net×(1+element waste%))
  • Truck loads=sum(ceil(pour-and-grade order/truck capacity))
  • In dimensions mode the element is a regular rectangular prism (slab or footing).
  • In direct-volume mode the entered volume is the user's own take-off; only the waste allowance is applied.
  • Reinforcement displacement and openings are not deducted.
  • All percentages and inputs are user-defined; the calculation is purely arithmetic and assumes no particular code or specification.
  • Scheduled elements are rectangular prisms only; deductions are documented total volumes, not per element. Slabs/beams/columns must not overlap; no automatic reinforcement deduction.
  • Grade is a project identifier, not mix design or code conformity. Truck loads round independently for each pour/grade; surplus from different pours is not pooled.

Frequently asked questions

Does the calculator include reinforcement steel?
No. It returns concrete volume only. For steel mass and bar counts use the Reinforcement Estimator, which takes your own steel ratio in kg per m³.
What waste percentage should I use?
The waste percentage is a project assumption you enter. Alasos does not assume a figure; use the allowance agreed for your works, method of placing and site conditions.
Is the result a code check?
No. It is deterministic quantity arithmetic (volume × count, plus waste). It performs no structural design check against any standard.

Next step and related links

Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.