ProfessionalAvailable now

Reinforcement Estimator

Estimate reinforcement weights and bar counts from a user-defined steel ratio.

This calculator is part of a paid level

Unlock this calculator with a single purchase; access stays on your account for life.

For budgeting and procurement you usually start from a steel ratio in kg per cubic metre taken from your own design or historical data. This tool turns that ratio into total mass, adds your waste allowance and converts to a bar count for one chosen diameter and stock length.

Method and assumptions

Legacy quantity estimate / detailed cutting schedule,00/11 and explicit centreline scope

  • 00 L=A;11 L=A+B−0.5r−d (mm), outside dimensions per source
  • Explicit centreline L=Σtangent straight+(rinside+d/2)Σθrad; add explicit approved lap once
  • Theoretical kg/m=7850π(d/1000)²/4; mass=length×count×kg/m
  • First-fit decreasing per diameter; stock count excludes impossible cuts and is not optimality proof
  • Estimate mode preserves existing math. Cutting schedule is not reinforcement design, ACI lap/development or seismic verification. Unverified bending rules are not copied. Other shapes need a drawing/licensed standard.
  • 7850kg/m³ is theoretical, not supplier weight; lap requires independent approval and is not inferred from waste. Stock and offcuts stay separate from consumption. A piece that exactly uses the remaining bar needs no separation cut; all other cuts charge one kerf, without end trimming.

Frequently asked questions

Where does the steel ratio come from?
You enter it. It is a design- or experience-based project criterion; the tool never assumes a ratio for a given element type.
How is bar unit mass calculated?
With the standard relation mass per metre = d² ÷ 162.28 for a round bar of diameter d in mm. Bar count is rounded up to a whole bar.
Does it produce a bar bending schedule?
No. It is an estimating aid for mass and bar count, not a detailing or BBS tool, and it does not cover laps, hooks or cutting optimisation.

Next step and related links

Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.