ProfessionalAvailable now

Formwork Calculator

Compute required formwork contact areas.

This calculator is part of a paid level

Unlock this calculator with a single purchase; access stays on your account for life.

Calculate contact area and reuse-adjusted formwork for take-offs. Enter face dimensions, face count, deductions, waste and reuse cycles. Free to use without signing in.

Method and assumptions

Geometric contact and simultaneous-set peak

  • Contact=Σ compatible formed faces×count−total deduction
  • Group set=max phase Σ net contact; new panels=ceil(max(0,set×(1+w%)−stock)/panel area)
  • Source and mark must be unique; rows replace previous measurements. Example dimensions/rates are not actual project data.
  • Geometry source: OpenStax Prealgebra2e§9.6; pipe/duct surface excludes end faces.
  • https://openstax.org/books/prealgebra-2e/pages/9-6-solve-geometry-applications-volume-and-surface-area
  • Lindab Rectangular.pdf p3: perimeter=2(a+b); geometry only, not DIN deduction rules.
  • https://itsolution.lindab.com/LindabWebProductsDoc/PDF/Documentation/ADS/Lindab/Technical/Rectangular.pdf
  • Sheet quantity is allowance-adjusted area, not sheet count, cutting/nesting or seam layout. Sum of group peak sets is not simultaneous project peak.
  • Phases do not overlap; each group is a compatible set. Demand is peak phase sum, never total divided by cycles. Existing stock is usable per group, not shared across groups. No structural supports/joints/cutting layout.
  • Mass uses entered density/thickness; not a pressure/fabrication gauge selection. Procurement rounding does not change measurement.
  • Legacy mode retains its arithmetic and limits; only the new schedule separates installed quantities from procurement.

Next step and related links

Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.