Tiles / Flooring Calculator
Estimate tile quantities and wastage.
Project & Input Data
An editable user-defined allowance — not a universal engineering requirement.
Embedded standards & references
- Declared area/volume and product dimensions; not structural conformity
Results are engineering aids and require verification by a qualified professional before use on a real project.
Engineering Assumptions
Direct calculation — Bounded geometric measurement and separate supply balance
- Regular rectangular measurement only; openings cover all surfaces and cannot exceed gross area. Intermediate quantities are not rounded. RICS NRM2(2021) informs measurement boundaries, not a claim to implement every deduction rule.
- https://www.rics.org/content/dam/ricsglobal/documents/standards/october_2021_nrm_2.pdf
- Masonry/tiles: repeating module with joint, not a cutting layout; boundaries, bond and patterns need project take-off. No mortar, grout or strength calculation.
- Paint uses practical product-datasheet coverage per whole coat. Plaster is wet volume only, not mix constituents. Stock matches product/unit and is allocated to this work.
- Excavation is a vertical box only, without shoring/slope design. Swell and backfill ratio are project soil data, not code values. Backfill factor=loose/compacted volume; not an additional percentage counted twice.
- Supply is separate from consumption; packs are whole. Excavation trips use loose volume and declared capacity; weight/road limits may increase trips. Results do not authorize construction.
Formula Summary
- Net area = length × height × count − total openings
- Repeating module = (unit length + joint) × (unit height + joint)
- Paint = net area × whole coats / product coverage; plaster = net area × wet thickness
- Earth: loose = in-situ × (1+swell); backfill loose = compacted × project ratio
- Purchase packs = ceil(max(0, requirement − compatible stock) / pack size)
Built-in measurement definitions
| Quantity | Identity |
|---|---|
| Area | L×H×N−openings |
| Box volume | L×W×D×N |
| Surplus | max(0,stock−required)+purchase−max(0,required−stock) |
Declared geometric identities; no normative waste or soil factor
Results
Enter your data and press Calculate to see the results.
Engineering Insight
Diagonal patterns, cuts, irregular room geometry, large tile formats and shade-matching requirements may all require a higher waste allowance than the default.
Recommended Action
Order an attic-stock surplus from the same production batch and review the setting-out drawing before confirming the quantity.
Estimating tiles by area alone under-orders every time cuts are involved. This calculator divides the floor area by the tile area, applies the cutting-waste percentage you choose, and rounds up to whole tiles so the order matches what the site can actually lay.
Method and assumptions
Bounded geometric measurement and separate supply balance
- Net area = length × height × count − total openings
- Repeating module = (unit length + joint) × (unit height + joint)
- Paint = net area × whole coats / product coverage; plaster = net area × wet thickness
- Earth: loose = in-situ × (1+swell); backfill loose = compacted × project ratio
- Purchase packs = ceil(max(0, requirement − compatible stock) / pack size)
- Regular rectangular measurement only; openings cover all surfaces and cannot exceed gross area. Intermediate quantities are not rounded. RICS NRM2(2021) informs measurement boundaries, not a claim to implement every deduction rule.
- https://www.rics.org/content/dam/ricsglobal/documents/standards/october_2021_nrm_2.pdf
- Masonry/tiles: repeating module with joint, not a cutting layout; boundaries, bond and patterns need project take-off. No mortar, grout or strength calculation.
- Paint uses practical product-datasheet coverage per whole coat. Plaster is wet volume only, not mix constituents. Stock matches product/unit and is allocated to this work.
- Excavation is a vertical box only, without shoring/slope design. Swell and backfill ratio are project soil data, not code values. Backfill factor=loose/compacted volume; not an additional percentage counted twice.
- Supply is separate from consumption; packs are whole. Excavation trips use loose volume and declared capacity; weight/road limits may increase trips. Results do not authorize construction.
Worked example
Two rooms of 5.20 m × 4.40 m tiled with 600 × 600 mm tiles and 8% cutting waste.
| Result | Value |
|---|---|
| Gross measured area | 45.76 m² |
| Total openings across all surfaces | 0 m² |
| Net measured area | 45.76 m² |
| Repeating module area including joint | 0.36 m² |
| Unrounded theoretical consumption | 127.11 tiles |
| Loss allowance on theoretical only | 10.17 tiles |
| Requirement including loss before stock | 137.28 tiles |
| Compatible stock used | 0 tiles |
| Whole purchase packs or batches | 138 units |
| Purchased quantity, not consumption | 138 tiles |
| Calculated surplus assuming continued compatibility | 0.72 tiles |
These figures are produced by the same calculator engine used on this page.
Frequently asked questions
- Are skirting and thresholds included?
- No. The result covers floor field tiles only. Skirting, thresholds, adhesive and grout are separate items.
- How is rounding handled?
- The tile count is always rounded up to the next whole tile after waste is applied, because part tiles cannot be ordered.
- Can I use it for wall tiling?
- Yes, if you enter the wall area as the surface dimensions. The arithmetic is the same; only your waste assumption may differ.
Next step and related links
Related calculators
- Plaster CalculatorConstruction Calculators
- Paint CalculatorConstruction Calculators
- Material Waste CalculatorConstruction Calculators
Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.


