HVAC Quick Start

Start Your HVAC Calculation in Minutes

Enter room volume and airflow to calculate air changes per hour. The result is a direct calculation — not a substitute for detailed design and technical review.

Free calculatorNo sign-up requiredClear units, instant results

1. Calculate air changes

Project & Input Data

Direction

Embedded standards & references

  • Continuity Q=vA and volume balance Q=V/t; no embedded code limits

Results are engineering aids and require verification by a qualified professional before use on a real project.

Engineering Assumptions

Direct calculation — Single physical identity with declared scope

  • No system selection or ventilation/fire/health compliance. ACH is nominal room-volume turnover, not distribution, outdoor air or clearance time; duct velocity is a mean at actual clear area.
  • Tank usable volume is separate from dead volume/freeboard; no assumed refill credit or fire storage. Pump capacity is an independent comparison at the same duty head, not a curve/NPSH check; simultaneity lies between0and100%.
  • Converter input is kW, L/s, Pa or °C by mode; absolute temperature, not temperature difference; nothing below absolute zero. NIST factors have published finite precision, not all exact.
  • https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication811e2008.pdf

Formula Summary

  • ACH=Q(m³/h)/V; mean duct velocity=Q(m³/s)/clear area
  • Usable tank=daily demand×days+reserve; water=usable+dead; height=water/area+freeboard
  • Pump comparison=max(daily demand/(hours×3600),peak×simultaneity/100)
  • IT Btu/h≈0.2930711W; TR=12000ITBtu/h≈3516.8532W; conventional inH₂O=249.0889Pa; international ft³=.028316846592m³

Definitions and fixed factors

FactorValue
BtuIT/h→W0.2930711
TR→W3516.8532 (12000×0.2930711)
inH₂O→Pa249.0889
ft³→m³0.028316846592

NIST2008 published precision; TR derived from12000BtuIT/h at the same precision; not design limits

Results

Enter your data and press Calculate to see the results.

Engineering Insight

The resulting change rate depends directly on the accuracy of the entered room volume.

Recommended Action

Compare the computed ACH against the minimum required for the space type before finalising the system design.

2. Choose your next step

Learn the fundamentals

The HVAC fundamentals and refrigeration cycle book explains the theory behind these calculations.

Free preview

Continue with professional calculations

Cooling loads, duct sizing, static pressure and equipment selection in the HVAC category.

  • Tools — Professional — —
  • Tools — Premium — —
HVAC tools

Send your project for design

Fill in the existing HVAC design request form with your project data. Sign-in required.

Request HVAC design

Get one short weekly issue

A practical insight, a common mistake and its impact, the tool of the week and a free template.

Double opt-in — your address is never shared