FreeAvailable now — free

Water Tank Capacity

Estimate required storage capacity.

Project & Input Data

Your project criterion: enter the value from your governing code, specification or approved supplier data. No standard value is assumed.

Embedded standards & references

  • Continuity Q=vA and volume balance Q=V/t; no embedded code limits

Results are engineering aids and require verification by a qualified professional before use on a real project.

Engineering Assumptions

Direct calculation — Single physical identity with declared scope

  • No system selection or ventilation/fire/health compliance. ACH is nominal room-volume turnover, not distribution, outdoor air or clearance time; duct velocity is a mean at actual clear area.
  • Tank usable volume is separate from dead volume/freeboard; no assumed refill credit or fire storage. Pump capacity is an independent comparison at the same duty head, not a curve/NPSH check; simultaneity lies between0and100%.
  • Converter input is kW, L/s, Pa or °C by mode; absolute temperature, not temperature difference; nothing below absolute zero. NIST factors have published finite precision, not all exact.
  • https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication811e2008.pdf

Formula Summary

  • ACH=Q(m³/h)/V; mean duct velocity=Q(m³/s)/clear area
  • Usable tank=daily demand×days+reserve; water=usable+dead; height=water/area+freeboard
  • Pump comparison=max(daily demand/(hours×3600),peak×simultaneity/100)
  • IT Btu/h≈0.2930711W; TR=12000ITBtu/h≈3516.8532W; conventional inH₂O=249.0889Pa; international ft³=.028316846592m³

Definitions and fixed factors

FactorValue
BtuIT/h→W0.2930711
TR→W3516.8532 (12000×0.2930711)
inH₂O→Pa249.0889
ft³→m³0.028316846592

NIST2008 published precision; TR derived from12000BtuIT/h at the same precision; not design limits

Results

Enter your data and press Calculate to see the results.

Engineering Insight

Increasing the storage days raises the required volume linearly and directly affects the tank's water level or footprint.

Recommended Action

Confirm the resulting water level is structurally and architecturally feasible before finalising the tank dimensions.

Storage sizing is simply demand × storage days plus any reserve you must hold. Enter those, plus the tank footprint you have space for, and the calculator returns the required volume and the resulting water depth so you can check it against the available head-room.

Method and assumptions

Single physical identity with declared scope

  • ACH=Q(m³/h)/V; mean duct velocity=Q(m³/s)/clear area
  • Usable tank=daily demand×days+reserve; water=usable+dead; height=water/area+freeboard
  • Pump comparison=max(daily demand/(hours×3600),peak×simultaneity/100)
  • IT Btu/h≈0.2930711W; TR=12000ITBtu/h≈3516.8532W; conventional inH₂O=249.0889Pa; international ft³=.028316846592m³
  • No system selection or ventilation/fire/health compliance. ACH is nominal room-volume turnover, not distribution, outdoor air or clearance time; duct velocity is a mean at actual clear area.
  • Tank usable volume is separate from dead volume/freeboard; no assumed refill credit or fire storage. Pump capacity is an independent comparison at the same duty head, not a curve/NPSH check; simultaneity lies between0and100%.
  • Converter input is kW, L/s, Pa or °C by mode; absolute temperature, not temperature difference; nothing below absolute zero. NIST factors have published finite precision, not all exact.
  • https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication811e2008.pdf

Worked example

24,000 L/day demand held for 2 days plus a 5,000 L reserve, in a tank with an 18 m² footprint.

Worked example results
ResultValue
Required usable storage53,000 L
Water volume including unusable part53 m³
Water depth from internal footprint2.94 m
Internal height including freeboard3.14 m
Geometric volume, not usable volume56.6 m³
Independent usable-storage shortfall53,000 L

These figures are produced by the same calculator engine used on this page.

Frequently asked questions

How many storage days should I use?
That is a project or authority criterion you enter. The tool assumes no statutory storage period.
Is fire-water storage included?
No. Domestic storage only. Fire reserve is estimated separately in the Fire Water Tank Estimate tool.
Does the depth include freeboard?
No. The reported depth is the water level for the entered footprint; add freeboard and structural thickness yourself.

Next step and related links

Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.