Water Tank Capacity
Estimate required storage capacity.
Project & Input Data
Your project criterion: enter the value from your governing code, specification or approved supplier data. No standard value is assumed.
Embedded standards & references
- Continuity Q=vA and volume balance Q=V/t; no embedded code limits
Results are engineering aids and require verification by a qualified professional before use on a real project.
Engineering Assumptions
Direct calculation — Single physical identity with declared scope
- No system selection or ventilation/fire/health compliance. ACH is nominal room-volume turnover, not distribution, outdoor air or clearance time; duct velocity is a mean at actual clear area.
- Tank usable volume is separate from dead volume/freeboard; no assumed refill credit or fire storage. Pump capacity is an independent comparison at the same duty head, not a curve/NPSH check; simultaneity lies between0and100%.
- Converter input is kW, L/s, Pa or °C by mode; absolute temperature, not temperature difference; nothing below absolute zero. NIST factors have published finite precision, not all exact.
- https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication811e2008.pdf
Formula Summary
- ACH=Q(m³/h)/V; mean duct velocity=Q(m³/s)/clear area
- Usable tank=daily demand×days+reserve; water=usable+dead; height=water/area+freeboard
- Pump comparison=max(daily demand/(hours×3600),peak×simultaneity/100)
- IT Btu/h≈0.2930711W; TR=12000ITBtu/h≈3516.8532W; conventional inH₂O=249.0889Pa; international ft³=.028316846592m³
Definitions and fixed factors
| Factor | Value |
|---|---|
| BtuIT/h→W | 0.2930711 |
| TR→W | 3516.8532 (12000×0.2930711) |
| inH₂O→Pa | 249.0889 |
| ft³→m³ | 0.028316846592 |
NIST2008 published precision; TR derived from12000BtuIT/h at the same precision; not design limits
Results
Enter your data and press Calculate to see the results.
Engineering Insight
Increasing the storage days raises the required volume linearly and directly affects the tank's water level or footprint.
Recommended Action
Confirm the resulting water level is structurally and architecturally feasible before finalising the tank dimensions.
Storage sizing is simply demand × storage days plus any reserve you must hold. Enter those, plus the tank footprint you have space for, and the calculator returns the required volume and the resulting water depth so you can check it against the available head-room.
Method and assumptions
Single physical identity with declared scope
- ACH=Q(m³/h)/V; mean duct velocity=Q(m³/s)/clear area
- Usable tank=daily demand×days+reserve; water=usable+dead; height=water/area+freeboard
- Pump comparison=max(daily demand/(hours×3600),peak×simultaneity/100)
- IT Btu/h≈0.2930711W; TR=12000ITBtu/h≈3516.8532W; conventional inH₂O=249.0889Pa; international ft³=.028316846592m³
- No system selection or ventilation/fire/health compliance. ACH is nominal room-volume turnover, not distribution, outdoor air or clearance time; duct velocity is a mean at actual clear area.
- Tank usable volume is separate from dead volume/freeboard; no assumed refill credit or fire storage. Pump capacity is an independent comparison at the same duty head, not a curve/NPSH check; simultaneity lies between0and100%.
- Converter input is kW, L/s, Pa or °C by mode; absolute temperature, not temperature difference; nothing below absolute zero. NIST factors have published finite precision, not all exact.
- https://nvlpubs.nist.gov/nistpubs/Legacy/SP/nistspecialpublication811e2008.pdf
Worked example
24,000 L/day demand held for 2 days plus a 5,000 L reserve, in a tank with an 18 m² footprint.
| Result | Value |
|---|---|
| Required usable storage | 53,000 L |
| Water volume including unusable part | 53 m³ |
| Water depth from internal footprint | 2.94 m |
| Internal height including freeboard | 3.14 m |
| Geometric volume, not usable volume | 56.6 m³ |
| Independent usable-storage shortfall | 53,000 L |
These figures are produced by the same calculator engine used on this page.
Frequently asked questions
- How many storage days should I use?
- That is a project or authority criterion you enter. The tool assumes no statutory storage period.
- Is fire-water storage included?
- No. Domestic storage only. Fire reserve is estimated separately in the Fire Water Tank Estimate tool.
- Does the depth include freeboard?
- No. The reported depth is the water level for the entered footprint; add freeboard and structural thickness yourself.
Next step and related links
Related calculators
- Water DemandPlumbing
- Pump FlowPlumbing
- Fire Water Tank EstimateFire Fighting
Free calculators are open to everyone, and CSV export is free for everyone too. Project saving and PDF/Excel reports come with Professional, and integrated workflows with Premium.


